Do you have questions ?
Soundproofing panels and wall systems are developed by Acoustic Force, based on German and Spanish soundproofing system models. We offer some of the thinnest, high-quality soundproofing systems that can be installed on hollow brick and concrete walls. These systems are used in apartments as well as recording studios. Depending on the thickness of the surface on which they are mounted, the sound insulation can range from 50 dB to over 65 dB. These systems provide an effective solution for airborne noise and noisy neighbors but are not effective against structural noise (such as stomping, banging, or moving furniture).
What sets these products apart from all others on the market is their ease of installation and reasonable price. They can be combined and adapted to suit any situation, with the ability to reduce thickness to as little as 3 cm (30 mm) at edges where there are doors or electrical outlets.
The specially designed elastic hanger from the Spanish company Senor allows for easy and stable leveling of the new soundproof wall lining. The hanger makes no compromises in the mechanical or anti-vibration qualities of the connection. NIVELATOR SOUND uses high-quality metal profiles specifically designed for this type of hanger, providing sufficient width for the installation of gypsum fiberboards. High-quality mineral wool is used, meeting standards for environmentally friendly products and acoustic performance.
The elastic microporous rubber strip separates the gypsum fiberboards and membrane from the adjacent elements. The gypsum fiberboard, combined with the soundproofing membrane, provides the necessary mass, which reduces the transmission of sound waves between rooms. The finishing gypsum board can be easily processed and prepared for painting. The soundproofing membrane is specially selected to offer maximum flexibility and to create sufficient shear resistance between the boards, thereby reducing resonance effects at matching frequencies.
NIVELATOR SOUND is a suitable solution for airborne noise and noisy neighbours when the noise is mainly in the 250 Hz – 5,000 Hz frequency range.
When the existing wall has vertical and horizontal deviations greater than 10 mm, the most suitable option with minimal thickness is the NIVELATOR SOUND system. It is designed to enhance sound insulation on surfaces made of aerated concrete, ceramic brick, and drywall. Suitable for soundproofing walls in residential, public, and office buildings.
Rw=60 dB
up to 40 mm
*Soundproofing index for 250 mm brick masonry with 20 mm plaster on each side* Soundproofing of walls in brick masonry
Technical data sheet for NIVELATOR SOUND
You can watch the installation of the Nivelator Sound system here.
The specially designed elastic hanger from the Spanish company Senor provides a greater air gap, which leads to excellent results at low frequencies. It also allows for easy and stable leveling of the new soundproof wall lining. No compromises have been made in the mechanical or anti-vibration qualities of the connection. MUSIC CONTROL uses standard metal profiles designed for this type of hanger. The use of high-quality mineral wool as the acoustic material not only provides better acoustic performance but also complies with standards for environmentally friendly products.
The separation of MUSIC CONTROL from the contact elements of the floor and ceiling slabs, as well as the surrounding perpendicular walls, is achieved using an elastic strip. The gypsum fiberboard, combined with the soundproofing membrane, provides the necessary mass that reduces the transmission of sound waves between rooms. The finishing gypsum board can be easily processed and prepared for painting. The soundproofing membrane is specially selected to offer maximum flexibility, thereby creating sufficient shear resistance between the boards. This effectively reduces resonance effects at matching frequencies.
The MUSIC CONTROL system is best suited for insulation against low-frequency noise from music systems, generators, air conditioners and similar sources, when the noise is mainly in the 50 Hz – 5,000 Hz.
MUSIC CONTROL soundproofing installation is most effective in music studios, workshops, or spaces characterized by low-frequency noise. It is frequently used for sound insulation in bedrooms, living rooms, elevators, bathrooms, and offices.
MUSIC CONTROL is adapted from systems used in the German and Spanish markets and tailored to the specific needs of Bulgarian consumers. It is applied on hollow ceramic bricks (single and quadruple bricks), aerated concrete, as well as on lightweight drywall partition walls. The system is suitable for soundproofing in residential, industrial, public, and office buildings.
Rw=65 dB*
from 105 mm to 180 mm
up to 80 mm
*Soundproofing index for 250 mm brick masonry with 20 mm plaster on each side* Soundproofing of walls in brick masonry
"*" indicates required fields
